Western Concrete Coatings

Resinous Flooring Systems in Denver

Resinous flooring systems are fluid-applied floors built for heavy wear, impact and thermal shock.

Request a bid
See the details

Denver, Colorado Springs and the Front Range

  • Service

Resinous flooring advantages

Resinous flooring is fluid-applied industrial flooring. Systems range from resin-rich self-leveling and broadcast floors to aggregate-rich epoxy mortars installed by screed box, trowel and power trowel. Aggregate adds impact resistance, weight and wear resistance.

  • Heavy duty, wear and slip resistant
  • Stain resistant
  • Protects against thermal shock and heavy impact
  • Resists many chemicals, acids and alkalis
  • Bridges hairline cracks
  • Seamless, easy to clean
  • Acceptable for USDA inspected facilities
  • Optional integral cove base
Glossy light gray resinous floor in an industrial workshop with shelving, supplies and black doors
Glossy tan resinous hangar floor with red and yellow safety striping across a large open industrial space
  • Best uses

Resinous flooring uses

  • Manufacturing areas
  • Forklift aisles
  • Food and beverage facilities
  • Mining
  • Automotive repair
  • Mechanical rooms
  • Animal care and kennels
  • Wastewater and water treatment
  • Drum storage
  • Petroleum refineries
  • Pulp and paper plants

Resinous flooring for wear, impact and thermal shock

Systems run 1/8 to 1/2 inch thick, usually with aggregate for the performance and non-slip level you need. Once cured, the surface can be harder and more durable than concrete. Integral cove base usually goes in with a seamless floor for extra protection.

Safety paths for forklifts and pedestrians

In several manufacturing facilities we installed gray epoxy paths for forklifts, wheeled and vehicle traffic and blue epoxy paths for pedestrians, separated by yellow safety markings. Topcoats can carry color-coded markings or striping as each facility needs.

Light gray seamless resinous floor with fine textured finish running along a white wall

Moisture testing for resinous flooring

100% solids epoxy systems need moisture vapor transmission (MVT) testing and usually a moisture control primer or mitigation system. Manufacturers typically require under 3 pounds of MVT and under 75% RH, on 3 test sites per 1,000 square feet over at least 24 hours. A floor that exceeds either gets a mitigation system first.

Urethane cement for moisture control

Because resinous floors are high build, we recommend or specify a mitigation system. Urethane cement is the preferred choice. It controls a nearly limitless level of MVT and extends the life of the resinous floor.

  • Related pages

Related floors.

Compare other systems and applications.

Epoxy Flooring

High build coatings that resist chemicals, stains and abrasion.

Glossy epoxy warehouse floor with blue and beige sections separated by yellow safety stripe between shelving

Urethane Cement

Fast cure, moisture tolerant floors for hot, wet and demanding facilities.

Terracotta red seamless floor in a commercial bakery kitchen with stainless coolers, sinks and stacked baking trays

Industrial

Industrial epoxy flooring for light to heavy industrial use, from chemicals to impact.

Smooth gray industrial epoxy floor coating across a loading bay with block walls, yellow bollards and blue doors
  • Next step

Tell us about your floor.

Call (303) 933-6542 for an evaluation, or share your space.

Request a bid
  • Start a project

Tell us about your floor.

Share the location, floor condition and timing.

Phone

(303) 933-6542

Email

info@westernconcretecoatings.com

Based in

Denver, Colorado
Western Concrete Coatings

Concrete flooring for Colorado facilities

Services

Company

Contact

© 2026 Western Concrete Coatings   |   Privacy Policy   |   Terms

Denver, Colorado Springs and the Front Range