Industrial Epoxy Flooring in Denver

Industrial epoxy flooring for light to heavy industrial use, installed by trained, certified crews.

Denver, Colorado Springs and the Front Range

Overview

Industrial epoxy flooring from Western Concrete Coatings handles light to heavy industrial use, from chemical, abrasion and impact resistance to waterproofing and slip resistance. As trained, certified installers, we evaluate the concrete and the jobsite, then choose the prep and system that perform best. Installed and maintained properly, these floors last many years in extreme conditions.

Red chemical-resistant epoxy floor and curbs coated around pumps, pipes and tanks in an industrial processing plant
Smooth gray industrial epoxy floor coating across a loading bay with block walls, yellow bollards and blue doors

Industrial epoxy flooring best uses

Questions to ask before choosing a system

Industrial epoxy flooring that passes EPA, FDA and USDA inspections

A failed floor can fail an EPA, FDA or USDA inspection. Use a contractor who has installed these floors in many situations and knows which system to recommend.

Road maintenance facility

At a road maintenance facility in use for decades, salt and chemicals had corroded the concrete. Removing failed areas revealed large voids, which we filled with resinous mortar. We coated the floor with 1/4 inch urethane cement and a topcoat, and it has held up under heavy trucks and constant chemical exposure.

Gold mine secondary containment

Chemical exposure destroyed the coatings and concrete in a gold mine secondary containment area, and the facility failed an EPA inspection over possible ground contamination. We repaired the concrete with urethane cement, then installed novolac epoxy and vinyl ester coatings, which resist high concentrate acids and caustics. Western Concrete Coatings is MSHA certified to work in mines.

BEFORE

Road maintenance shop floor before coating, with failed concrete being ground and vacuumed

AFTER

Road maintenance shop floor after repair and coating, smooth gray finish with a blue door and yellow curb

Waterproofing for mechanical rooms

We often waterproof upper-level mechanical rooms so a leak does not flood the floors below. A flexible membrane with an integral cove base keeps water in the room.

Protecting concrete in extreme conditions

Industrial floor coatings shield the substrate from extreme exposure, heavy traffic, shop use and chemicals. They also keep the floor cleanable and support your safety protocols.

Smooth satin gray coated concrete floor in an industrial shop with blue and yellow trim
Light gray coated concrete floor with a metal drain grate in an industrial maintenance bay
Dark gray coated concrete floor in a warehouse bay with yellow posts and a loading dock
Badly deteriorated industrial concrete floor with crumbling aggregate, chemical staining and rust near a steel column base
Crew grinding cracked, patchy bare concrete floor with a dust-collecting grinder in an industrial bay

Tell us about your floor.

Call (303) 933-6542 for an evaluation, or share your space.

Tell us about your floor.

Share the location, floor condition and timing.

Based in

Denver, Colorado